About Us | Product Line | Artica Range | Paper Glossary | News Letter

Produuct Line » Amtronics » POLAQUA 103 »
  POLAQUA 103
Water Based Primer
Polaqua 103 is an extrusion, lamination and printing primer for use on a wide variety of accepting substrates. It exhibits excellent great and oil resistant bond strengths with only minute application levels. Application should be proportionate to one undiluted gallon of Polaqua 103 for 20 to 30 reams (60,000 to 90,000 Ft²) of substrate.
Polaqua 103 may be used as supplied or diluted with water up to 1 part Polaqua 103 to 1 part water, A water/isopropyl alcohol combination may be used in place of water for better wet-out and faster drying.
Polaqua 103 should be applied to the substrate and dried. The extrudate lamination or printing inks will then rigorously bond to the primed surface. The substrate may be primed and rewound for subsequent use at a later date up to 90 days with no blocking or reduction in bond strengths.
TYPICAL PROPERTIES CHARACTERISTICS
Color Blue
Solids 2%
Wt./Gal. 8.35 lbs
pH 9.1
Sp. Gravity 1.0027 70 Deg. F
Viscosity Zahn #2 - 15 sec
77 F Brookfield LVT, 60 RPM
Spindle 1 -4.5 cps.
Acrylic Odor
Non-Toxic
Non-Flammable
Non-Corrosive
Long Shelf Life
USES
Extrusion Primer
Lamination
Printing Ink Primer

COMPATIBLE COMBINATIONS
LDPE-Surlyn-Printing Inks to accepting substrates:
Polyester, Polypropylene, Nylon, Cellophane, Vinyl, PVDC, Aclar, Aluminum Foil, Polycarbonate, Paper and Board.

APPLYING CONDITIONS
Room temperature 50 Deg F and up.
Solution temperature 33 Deg to 170 Deg F.
Pick-Up Roller - Smooth or Gravue 200 line and up.
Squeeze Roller - Hard Rubber 80 to 90 durometer.
Primed surface must be thoroughly and absolutely dry before web is introduced to lamination, extrusion or printing.

Polaqua 103 as with all Polaqua systems is water based and formulated from ingredients found on FDA lists cleared for packaging.
Copyright © 2007 Sudhir Paper Limited. All Rights Reserved
Disclaimer | webmaster@indiapaper.com
 By: Techweb