| |
 |
|
| |
|
| Produuct Line »
Silicon Paper » Ultralube
» |
 |
| |
| WAX ADDITIVES in OPV'S |
Ultralube |
|
 |
 |
| Results
of abrasion tests(Quartant, Prufbau) at a typical water based overprint
varnish (wet film thickness 6 micro m with a content of a) no wax
additive b) 3.15% of a typical wax emulsion of a competitor c) 2.4%
ultrtalube E-842 N d) 1.4% ULTRALUBE MD-2000 (dosage levels calculated
as solids in the final formulation a) after 200,b,c, d)after 2000
abrasion cycles |
Results
of gloss measurements (micro-tri-gloss,BYK-Gardener) at the OPV without
any addition of wax additive, using 3,15% typical wax emulsion of
a competitor, using 2,4% ULTRALUBE E-842 N and using 1,4% ULTRALUBE
MD-2000 (dosage levels calculated as solids in the final formulation). |
| Product description |
ULTRALUBE
E-842 N and ULTRALUBE MD-2000 are water based wax additives
in order to increase the abrasion resistance as well as the
mar and scuff reisistance, the slip and the anitblocking behaviour
of water based OPV-formulations at high degree of gloss. These
was additives can be easily incorporated into the complete OPV-formulation
by addition under stirring |
Technical data
| ULTRALUBE V-type |
Wax type |
ionic character |
Solids |
pH |
mean particle size |
dosage level |
| E-842 N |
HDPE |
non ionic |
42% |
6,0 |
50-80nm
|
2-6% |
| MD-2000 |
HDPE |
non ionic |
50% |
9,0 |
1,2-1,5 microM |
1-3% |
|
|
Packaging
- 120
Kg drum
- 1000
Kg container
- tank
lorry
|
|
| |
|
|
|
