(Schematic
demionstration or the reaction principle in ULTRALUBE V-types (W:
partially oxidized wax particle, B;binder remark pH-value of the
complete formulation > 8 is necessary for crosslinking)
Product
description
ULTRALUBE
V-types are water based HDPE-wax emulsions with crosslinking properties
to improve the surface qualities of printing inks and lacquers. The
ability of these products for crosslinking by drying leads to coatings
with improved chemical resistance and adhesion to the substrate.
Technical
Data
ULTRALUBE
V-type
Wax
type
Solids
ionic
character
pH
Melting
range
remarks
E-500
V
HDPE
35%
N
8,0
127
d c (wax)
base
type
E-500
V
HDPE
35%
N
8,5
127
d c (wax)
Improved
gloss and anti blocking at elevated temperatures compared
with E-500 V
E-500
V
HDPE
35%
N
9,0
127
d c (wax)
Leads
to improved wetting and levelling properties
E-500
V / E-531 V
HDPE/Co
polymer
30%
N/A
9,5
127
d c (wax)
especially
as adhesion promoter for flexo inks on corona treated polylefin
substrates
Application
ULTRALUBE
V-types are used in water based
lacquers
printing
inks
in
order to increse or improve
Slip
abrasion
resistance
antiblocking
effect
chemical
resistance
at
ahigh degree of gloss at typical dosage levels between 2 and 12%
related to the entire formulation
